The LEA Standard-elevator system for residential and commercial buildings with many options, even for reduced shelters in shaft head and pit.
Energy-efficient gearless drive system PMC125/145 also with energy recovery frequency inverter E300 and M600.
The LEA Standard-kit consisting of car, shaft equipment, doors, safety components, drive and inverter can be completed with any controller and the control and display elements of their choice. The interfaces to the electrical components are defined.
The LEA Standard-system is based on a type-tested system and can be placed on the market with the freely selectable electrical components with individual approval.
Technical Data LEA Standard 1001) |
Rated load | Q | [kg] | 450 | 450 | 630 | 1000 |
Car width | CW | [mm] | 1000 | 950 | 1100 | 1100 |
Car depth | DC | [mm] | 1250 | 1300 | 1400 | 2100 |
Shaft width (DW 900) | SW | [mm] | 1500* | 1450* | 1600 | 1625 |
Shaft depth (Door in shaft) | SD | [mm] | 1665 | 1700 | 1815 | 2515 |
*DW 800 (telescopic door) | | | | | | |
Technical Data LEA Standard 2001) |
Rated load | Q | [kg] | 320 | 450 | 630 | 1000 |
Car width | CW | [mm] | 900 | 1000 | 1100 | 1800 |
Car depth | DC | [mm] | 1000 | 1300 | 1400 | 2100 |
Shaft width (DW 900) | SW | [mm] | 1445* | 1500* | 1970 | 2270** |
Shaft depth (Door in shaft) | SD | [mm] | 1430 | 1730 | 1830 | 2530 |
*DW 800, **DW 1000 (telescopic door) 1) Maximum value | | | | | | |
This kit can optionally be designed with a car sling